Overview

Interface Definition
DC-24V: DC voltage 24-28V input terminal.
RF OUT: (N-J) Power amplifier module signal output terminal.
CTRL: Signal output control terminal (TTL level).
When "1" is set, the signal is on and the module has an output.
When it is set to "0", the signal is turned off and the module has no output.
Detection: Output power detection terminal (TTL level output).
When it is "1", the amplifier has output.
When it is "0", the amplifier has no output.
Specification
Item | Specification |
---|---|
Frequency Range (MHz) | 2.4G: 2400–2500 MHz5.2G: 5150–5350 MHz5.8G: 5725–5850 MHz |
Impedance | 50 Ω |
Stray and Harmonic | Outside the working frequency band, no obvious stray or 2nd/3rd harmonic signal |
Output Power Stability | ≤1.5 dB |
Flatness of Sweep Frequency Signal | ≤1.5 dB |
Output Power (RX Power) | ≥200 W (53 dBm) |
Gain | ≥53 dB |
Power Supply Voltage | DC: 32 V |
Output Interface | OUT-N-J |
Working Current (at 200 W output) | 11–12.5 A |
Temperature Protection | 80 ℃ (adjustable upon request) |
Static Current | ≤1.5 A |
Interfaces | Power supply interface, CTRL transmission control interface, power detection interface |
Power Detection Output Voltage | 5 ± 0.5 V |
Scanning Frequency | ≥300 K |
Weight | 600 g |
Module Size | 202 × 57 × 21.5 mm (excluding protruding connector parts) |