Factory 10W 2.4G Wireless RF Power Amplifier Module Anti Drone Jamming Module
10W 2.4G Anti Drone RF Module Description
Definition: This drone jammer module emits radio frequency signals to interfere with the communication signal between a drone and its operator. Additionally, it can block the drone’s navigation signal. After being jammed, the drones enter an emergency mode that either begins a landing maneuver or returns to their Home point.
Frequency: 2.4G(2400-2485MHz)
Maximum jamming distance: 1500M (Omnidirectional:500-1000M ＆Directional:800-1500M)
Function: Prevent drone threats from entering controlled airspace and critical areas such as airports, prisons and industrial facilities. They may also be used to protect military personnel and buildings on the battlefield.
UAV Jammer Module: Advanced Technology For Superior Performance
This module is equipped with the latest jamming technology. It can disrupt multiple communication frequencies simultaneously, effectively neutralizing even the most sophisticated drones. This device's advanced algorithms and powerful signal output guarantee that it can counteract various drone types, thus providing comprehensive protection in any situation.
Product Show 
Interface Definitions
Our Advantages
Drone jammer: What can we provide to you?
Product Applications
Drone Jammer Module: Enhanced Security for Sensitive Areas
This module is a critical tool for securing sensitive areas. For securing sensitive areas such as military bases, airports, and government facilities. This product comes with the ability to neutralize drones from a distance. This product ensures that no unauthorized aerial surveillance or potential threats compromise the safety of vital locations. Incorporate this product into your security protocol. Significantly reduce the risk of drone-related incidents by using this product.
| Item | Parameter |
| Type | 10W-RF-Module |
| Place of Origin | Guangdong, China |
| Brand Name | DescBoot |
| Supplier Type | OEM/ODM |
| Frequency Range | 433M:428-438 900M:840-928 1.2G:1150-1250 1.4G:1450-1550 1.5G:1560-1620 2.4G:2400-2485 5.2G:5150-5350 5.8G:5725-5850 |
| Output Impedance | 50 ohms |
| Spurious & Harmonic | No significant spurious or 2/3 harmonic signals outside the operating band |
| Output Power Stability | ≤1.5 dB |
| Sweep Signal Flatness | ≤1.5 dB |
| RX Power | ≥10W (40dBm) |
| Gain | ≥40db |
| Supply Voltage | DC: 24V - 28V |
| Interface Mode | OUT-SMA |
| Output Current | 1.0A-1.5A |
| Static Current | ≤0.6A |
| Interfaces | Power supply interface |
| CTRL transmission control interface | |
| power detection interface | |
| Power Detection Output Voltage | 5±0.5V |
| Scanning Frequency | ≥200K |
| Weight | 90g |
| Module Size | 88X43X13MM |
How to connect the module to the power source
- Plug in a 24V output wire to it
- Provide it with another 5V high-level voltage
- Having connected these two wires, proceed to install the antenna. Tighten the antenna
- In the process of operation, the wires must be connected
- Then supply it with both 24V and 5V simultaneously to generate power for transmission
Precautions
Please ensure the RF module is equipped with the necessary heat dissipation accessory the well-connected antenna and the suitable power supply before its use.