20W 5.8G Drone Signal Jammer Module Description
This drone signal jammer module is easy to integrate into other jamming devices, emitting powerful radio frequency to disrupt drones' communication and navigation signals. Prevent the drones from sending control or navigation signals and reaching their final destination, forcing them to land emergently and navigate back to their origin.
Frequency: 433/900M 1.2/1.4/1.5/2.4/5.2/5.8G
Maximum jamming distance: 2000M
Product Show
Interface Definitions
Our Advantages
Product Applications
FAQs
1. Why would I need signal jammer modules?
They can be essential in scenarios where drone surveillance or unauthorized drone presence poses a threat. These devices are commonly used in sensitive areas such as prisons, military bases, and private properties. Deploying a signal jammer helps you maintain control over airspace, prevent espionage, and ensure a safer environment.
2. Is the 5.8G frequency the most commonly used for drones?
Yes, the 5.8G frequency is one of the most commonly used frequency bands for drone communications, especially for video transmission and control signals. Many consumer drones utilize this frequency due to its ability to provide clear signals over reasonable distances.
3. What is the anti drone module?
It is the core component of signal jammers. And it can be installed into drone jammer backpacks, portable＆stationary drone jammers, vehicle-mounted drone signal jammers, etc.
4. What is the component of the anti drone module?
1. They include both omnidirectional and directional antennas. And they send out jamming signals to block the targeted frequencies.
2. Signal Generator: This tool creates jamming signals that interfere with the target signal.
3. Power Amplifier: Amplifies the signal generated by the signal generator so that it is strong enough to block the target signals.
4. Control circuit: This circuit allows the operator to configure settings and monitor performance.
5. What's the difference between our FPV and UAV signal jammer module?
All the modules can defend against drones, but you can choose more frequencies from the FPV drone jamming module.
| Item | Parameter |
| Type | 20W RF Module |
| Place of Origin | Guangdong, China |
| Brand Name | DescBoost |
| Supplier Type | OEM/ODM |
| Frequency Range | 2.4G:2400-2485 433M:428-438 1.5G:1560-1620 1.4G:1450-1550 1.2G:1150-1250 900M:840-928 5.8G:5725-5850 5.2G:5150-5350 |
| Output Impedance | 50 ohms |
| Spurious & Harmonic | No significant spurious or 2/3 harmonic signals outside the operating band |
| Output Power Stability | ≤1.5 dB |
| Sweep Signal Flatness | ≤1.5 dB |
| Output Power | ≥20W (43dBm) |
| Gain | ≥43dB |
| Supply Voltage | DC: 24V - 28V |
| Interface Mode | OUT-SMA |
| Working Current | 1.5A-2.2A |
| Static Current | ≤0.6A |
| Interfaces | Power supply interface |
| CTRL transmission control interface | |
| power detection interface | |
| Power Detection Output Voltage | 5±0.5V |
| Scanning Frequency | ≥300K |
| Weight | 150g |
| Module Size | 102X52X17.5MM |
How to connect the module to the power source
- Plug in a 24V output wire to it
- Provide it with another 5V high-level voltage
- Having connected these two wires, proceed to install the antenna.Tighten the antenna
- In the process of operation, the wires must be connected
- Then supply it with both 24V and 5V simultaneously to generate power for transmission
Precautions
Please ensure the RF module is equipped with the necessary heat dissipation accessory the well-connected antenna and the suitable power supply before its use.