10W 6.1–7.2GHz FPV Video Transmitter 64CH Long Range Analog VTX with IRC Tramp OSD for UAV

$47.00

Key Advantages＆ Features

  • Integrated R&D and Manufacturing: In-house development and production enable faster customization, stable quality control, and reliable project delivery.
  • 10W High Power Output: Supports longer-range and more reliable analog video transmission for demanding FPV and UAV applications.
  • 64 Selectable Channels: Provides greater frequency flexibility and helps reduce interference in complex RF environments.
  • CNC Aluminum Housing: Enhances durability and structural strength for long-term operation in challenging conditions.
  • Efficient Thermal Management: Optimized cooling design helps maintain stable performance during continuous high-power operation.
  • IRC Tramp OSD Control: Enables convenient remote configuration through the flight controller, simplifying VTX setup and adjustment.
Send Inquiry Now>
Überblick

10W 7.2GHz FPV VTX

 This is a high-power analog video transmitter designed for long-range FPV and professional UAV applications. Operating across 6.1–7.2GHz with 64 channels, it provides stable video transmission, flexible frequency selection, and strong anti-interference performance.

With up to 10W adjustable RF output power, a CNC aluminum housing, and an optimized cooling design, it supports reliable operation in demanding environments and extended flight missions. The transmitter also supports IRC Tramp OSD control, allowing pilots to remotely adjust VTX settings through the flight controller for faster and more convenient operation.

Spezifikation

Specifications

ItemSpecification
Working VoltageDC 7–36V
Working Current2.6A @ 12V
Operating Temperature-10°C to 65°C
Weight50g without antenna
Dimensions64 × 34 × 19.5mm
Mounting Holes20 × 20mm M2 threaded holes; 30.5 × 30.5mm M3 threaded holes
Number of Channels64CH
Frequency Range6100–7200MHz
Output Power500mW / 2W / 5W / 10W
Control ProtocolIRC Tramp, supports OSD parameter tuning
Modulation TypeFM Frequency Modulation
Channel Bandwidth8MHz
Antenna InterfaceSMA Female
Video FormatNTSC / PAL

Interface Description

InterfaceDescription
VideoVideo signal input, connect to flight controller or camera video output.
GND1Camera ground connection. Leave unconnected if not required.
5Vout5V output for camera power supply.
DataVTX control signal input. Connect to flight controller UART TX port.
GNDPower input ground.
DCINDC power input: 7–36V.

Button Operation

Power Button

  • Short press: Switch power levels between 500mW, 2W, 5W, and 10W.
  • Double press: Enter PIT mode.
  • Long press: Lock or unlock power and frequency buttons.

FRCH Button

  • Short press: Switch channels CH1–CH8.
  • Press and hold for 3 seconds: Enter band switching mode.

LED Status

PWR LED StatusPower Level
OffPIT Mode
Solid OnButtons Locked
Flashes Once500mW
Flashes Twice2W
Flashes 3 Times5W
Flashes 4 Times10W

Frequency Table

Band CH1CH2CH3CH4 CH5CH6CH7CH8
Band B62706290631063306350637063906410
Band E64306450647064906510653065506570
Band F65906610663066506670669067106730
Band R67506770679068106830685068706890
Band H69106930695069706990701070307050
Band L70707090711071307150717071907210
Band U61156265642565856745690570657185

Mechanical Dimensions

  • Length: 64mm
  • Width: 34mm
  • Height: 19.5mm
  • Mounting Holes: 20 × 20mm and 30.5 × 30.5mm

Note

When the Data wire is connected to the flight controller UART TX port, button control will be disabled.

Packing List

  • 8-pin cable, cable length: 150 ± 3mm
  • Mushroom antenna, supports 7.2GHz band, cable length: 140 ± 3mm

SCHREIBEN SIE UNS